Positive Air Flow Fully Filtered Face Mask

Description

No longer re-breathe the same air over and over. Full Throttle O2 continually pushes fresh air into the mask. All air pushed into the mask has to pass through a filter before you breathe it.
No longer feel as though you can't breathe when wearing a mask. Full Throttle O2 pushes a continual stream of new air into the mask so you don't feel out of breath.
There is no need to worry about one way valves allowing your breath droplets to exit your mask. Full Throttle O2 has filters at each of the three air inlets and outlets.
What you will receive when you order a Full Throttle O2 face mask assembly:
- A fully assembled face mask with a memory foam face seal, dual ball bearing USB powered fan and filters already installed (Elastic straps are left 5 inches longer than
standard and not tied on one side. This allows the wearer to adjust the fit as they feel is most comfortable for them
- A 5000mAh external, rechargeable battery pack
- A 3 foot USB extension cable. This gives the wearer maximum physical flexibility while wearing
-  Installed filters plus five months of replacement filters (This is based on changing filters once per month)
Full Throttle O2 is a positive airflow face mask. This mask has an internal fan that is powered by a rechargeable 5000mAh battery pack. The battery pack is the size of a deck of playing cards. The battery pack can power the masks fan during continual use for more than 16hrs. The mask can also be plugged into any 5V power source. One example of this would be the USB power outlet on a commercial airplane, or any other USB power supply that can be utilized to charge a cell phone. All air inlets and outlets are filtered by MERV 13 industrial filter paper that is CNC cut to fit. This means that all air breathed in, and out is filtered. This mask is 3D printed from PETG. PETG is a plastic that can be cleaned with Isopropyl alcohol, Bleach & Water or Soap and Water.
I originally designed this mask for my Dad. He has COPD and could not breathe in a standard face mask. After seeing how much better he felt while wearing this I decided to refine the design and give them to a few friends that had to wear masks all of the time (even when working out at the gym). The added air flow the fan gave helped tremendously. Now you know why "Full Throttle O2" was started. If you have trouble breathing in a traditional mask, if you don't like continually re-breathing your own air, or find you get too hot in a traditional face mask then Full Throttle O2 is the mask you have been looking for!